Description
Operation instructions:
1. Install the upper and lower clamps on the upper and lower joints of the test machine respectively, insert the bolt and tighten the nut;
2. The handle of the upper clamping device should be moved first, which means that the clamping port should be opened properly, larger than the thickness of the sample installed;
3. Place one section of the sample between the pliers of the upper clamping device and place the sample in the center of the clamping device. Loosen the upper handle and clamp the upper end of the sample
4. Return the force value to zero;
5. Lift the handle of the lower clamping device, adjust the height of the moving beam, insert the sample into the clamping port of the lower clamping device, and then release the lifting handle, which is the clamping sample of the clamping device.
Note:
This product comes with two sets (number 4) flat jaw: 0-7mm
If you need accessories of other specifications, please contact us.
-Flat jaws: 7-14mm
-V-shaped jaws: Ø4- Ø9mm
-V-shaped jaws: Ø9- Ø16mm
Item Included:
The batteries jig(one set includes two pieces)054131
1. Install the upper and lower clamps on the upper and lower joints of the test machine respectively, insert the bolt and tighten the nut;
2. The handle of the upper clamping device should be moved first, which means that the clamping port should be opened properly, larger than the thickness of the sample installed;
3. Place one section of the sample between the pliers of the upper clamping device and place the sample in the center of the clamping device. Loosen the upper handle and clamp the upper end of the sample
4. Return the force value to zero;
5. Lift the handle of the lower clamping device, adjust the height of the moving beam, insert the sample into the clamping port of the lower clamping device, and then release the lifting handle, which is the clamping sample of the clamping device.
Note:
This product comes with two sets (number 4) flat jaw: 0-7mm
If you need accessories of other specifications, please contact us.
-Flat jaws: 7-14mm
-V-shaped jaws: Ø4- Ø9mm
-V-shaped jaws: Ø9- Ø16mm
Item Included:
The batteries jig(one set includes two pieces)054131
- Maximum test force :100kN
- Plate: flat jaws 0-7mm
- The bar: Ø 4 – Ø 16 mm(V-shaped jaws)
- Suitable for 100kN testing force electronic universal testing machine
- This fixture is suitable for the tensile test of metal and non-metal plates and bars.
There are no reviews yet.